Skip to Content

2815-00-213-0834 Cylinder Head 0.010" Oversize 10951304-1

(0 review)
Cylinder Head - 0.010" Oversize

This cylinder head is an assembly of a steel cylinder liner electron beam welded to a steel cylinder head. An aluminum heat sink is interference fit over the cylinder. The cylinder liner can be sealed to minimize fuel and oil seepage through the slightly porous steel.

Nominal Cylinder Bore Diameter: 5.760 inches

Condition: Remanufactured

Remanufactured AVDS-1790 Cylinder Heads Process:
  • Cylinder External Surfaces are cleaned and shot blast
  • Cooling fins are inspected, straightened and broken fins repaired
  • Valves and Valve Guides are replaced
  • Cylinder Bore is honed by CNC with automatic air laser measurement to within 0.001" of bore diameter with less than 0.0005" bore taper end-to-end.
  • HELICOIL threads and Studs are replaced as necessary.
  • Cylinder is pressure tested at 200 PSI for 5 Minutes to ensure valve and cylinder sealing.
  • Flat White CARC paint is applied to the cylinder flange to aid in leak detection during operation.
Used on AVDS-1790-2 Series Engines:
  • AVDS-1790-2C
  • AVDS-1790-2CA
  • AVDS-1790-2D
  • AVDS-1790-2DA
  • AVDS-1790-2DR
  • AVDS-1790-8CR
Core Exchange
  • We can rebuild your core Cylinder Heads
  • We buy core Cylinder Heads - Contact Us
2815002130834 
002130834 
10951304-1
7,150.00 7,150.00

Not Available For Sale

(0.00 / EA)

This combination does not exist.

Ships within 20 days